CIT 274 ENTIRE COURSE

CIT 274 ENTIRE COURSE | University Of Phoenix 

CIT 274   ENTIRE COURSE
 
 
WEEK  1

CIT 274 Week 1 Individual Assignment 200-105 – Interconnecting Cisco Network Devices (ICND2 v3.0)

Instructions: Complete the following modules of Practice Labs "200-105 Interconnecting Cisco Network Devices (ICND2 v3.0)": 

• "Configure, Verify, and Troubleshoot Spanning Tree Protocols"  
• "Configure, Verify, and Troubleshoot Ether channel" 
• "Configure, Verify, and Troubleshoot STP Related Features"    
• "Configure, Verify, and Troubleshoot Inters Witch Connectivity" From within Practice Labs, copy and paste the final config from each device into Microsoft® Word after finishing the module "Configure, Verify, and Troubleshoot Inters Witch Connectivity." Submit your assignment using the Assignment Files Tab.

Note: Please ensure that you have a full "show running config" output visible from any devices modified as part of the lab. You will have a chance to discuss the lab experience with your class and facilitator next week

CIT 274 Week 1 Individual Assignment STP Implementation

Instructions: In reviewing a network diagram for your organization, you find that it follows the distribution and access layer model, as shows in Figure 3-1 of the CCNA Routing and Switching ICND2 200-105 Official Cert Guide. You decide to implement the recommendations from the text in terms of making one distribution switch the root and the other the backup. Write a 2- to 3-page proposal using Microsoft® Word describing how you would implement the configuration. Include the following:   

• What commands would you use to change the priority of the first distribution switch? Completely explain why you chose this priority.
• What commands would you use to change the priority of the second distribution switch? Completely explain why you chose this priority. 
• In the event of a failure of the first switch, accurately describe the election process that would occur to elect the secondary as the new root. Submit your assignment using the Assignment Files tab. 
  WEEK  2
  
  

 CIT 274 Week 2 Individual Assignment Troubleshooting inter VLAN Routing and Host Configuration Issues

Instructions: Complete the following module of Practice Labs "Cisco 100-101 Interconnecting Cisco Networking Devices Part 1":   

• "Troubleshooting inter VLAN Routing and Host Configuration Issues" From within Practice Labs, copy and paste the final config from each device into Microsoft® Word. Submit your assignment using the Assignment Files tab.

Note: Please ensure that you have a full "show running config" output visible from any devices modified as part of the lab

 CIT 274 Week 2 Individual Assignment Network Redundancy

Instructions: You work for an organization that currently has a network layout similar to the one pictured in Figure 20-1 of the CCNA Routing and Switching ICND2 200-105 Official Cert Guide. You know that you need to enhance redundancy, but need to decide between a recommendation like that pictured in Figure 20-2 or Figure 20-3. Create a 10- to 12-slide presentation for the CFO of the organization. Include the following:   

• An accurate outline of the current situation
• The two options being considered for improvement, and your recommendation
• Information on the risks and costs versus benefits of each approach. List at least 3 examples.
• Substantial speaker notes to elaborate on the key points of your argument. Note: Other applications like Adobe® Spark® or Microsoft® Sway® or Mix® can be used instead of PowerPoint®. Draw a 1-page network diagram using any freeware drawing software you wish to use that illustrates one of the options for the improvement. Submit your assignment using the Assignment Files tab.
   
  

WEEK  3

CIT 274 Week 3 Individual Assignment Troubleshooting EIGRP Routing Related Problems

 
Instructions: Complete the following module of Practice Labs "Cisco 200-101 Interconnecting Cisco Networking Devices Part 2":   

• "Troubleshooting EIGRP Routing Related Problems" From within Practice Labs, copy and paste the final config from each device into Microsoft® Word. Submit your assignment using the Assignment Files tab.

Note: Please ensure that you have a full "show running config" output visible from any devices modified as part of the lab.

 
CIT 274 Week 3 learning Team Assignment Routing Protocol Types

 
Instructions: You receive a request from a colleague who is new to the networking field. They were just learning about the difference between distance vector and link-state routing protocols. Knowing that your business runs EIGRP, they ask you to help them classify EIGRP. Create a 2- to 3-page response table using Microsoft® Word or Excel® responding to your colleague on the topic. The column heading should be distance-vector, link-state, and EIGRP, and the rows should be the attributes. Include the following: 

• Accurate description of four attributes of distance-vector and link state routing protocols  
• Explanation of where EIGRP does and does not fit into these attributes and any logical justification to put it in a category of its own Submit your assignment using the Assignment Files tab. 
  

WEEK  4

CIT 274 Week 4 Individual Assignment Troubleshooting OSPF Routing Related Problems

 
Instructions: Complete the following module of Practice Labs "200-120 - Cisco Certified Network Associate":  

• "Troubleshooting OSPF Routing Related Problems" From within Practice Labs, copy and paste the final config from each device into Microsoft® Word. Submit your assignment using the Assignment Files tab.

Note: Please ensure that you have a full "show running config" output visible from any devices modified as part of the lab. 

CIT 274 Week 4 Individual Assignment Troubleshooting OSPF Routing Related Problems

Instructions: You work for an organization that currently has a network layout similar to the one pictured in Figure 7-12 of the CCNA Routing and Switching ICND2 200-105 Official Cert Guide. You are trying to decide whether to use the single-area OSPF design depicted there or the multi-area OSPF design depicted in Figure 7-13. Research the advantages and disadvantages of a single-area versus a multi-area design for a network of this size. Create a 1- to 2-page comparison table in Microsoft® Word or Excel that covers the following. The column headings should be single-area and multi-area and the rows heading should be risks and benefits.    •  Concise description of the two designs    •  At least three risks and three benefits of each approach Submit your assignment using the Assignment Files tab.

WEEK  5

CIT 274 Week 5 Individual Assignment Troubleshoot Switch Related Technologies

Instructions: Complete the following module of Practice Labs "200-120 - Cisco Certified Network Associate":   

• "Troubleshoot Switch Related Technologies" From within Practice Labs, copy and paste the final config from each device into Microsoft® Word. Submit your assignment using the Assignment Files tab.

Note: Please ensure that you have a full "show running config" output visible from any devices modified as part of the lab.

CIT 274 Week 5 Individual Assignment 200-120 – Cisco Certified Network Associate: Final Review Test Lab

Instructions: Complete the module "Final Review Test Lab, Lab 1" of Practice Labs "200-120 - Cisco Certified Network Associate." From within Practice Labs, copy and paste the final config from each device into Microsoft® Word. Submit your assignment using the Assignment Files tab. Note: Please ensure that you have a full "show running config" output visible from any devices modified as part of the lab.

CIT 274 Week 5 Individual Assignment Troubleshooting Guide and Presentation

Instructions: You work for an organization that currently has a network layout that is stable, however your supervisor would like to prepare for issues that may occur as the business grows. She wants you to create a Troubleshooting Guide for issues that may arise. She would also like you to present to the Executive Team, which includes non-technical team members, to help them understand her concerns for the network as the business scales upward. It is important for you to translate the highly technical terms of switching and routing to all of the team members. In Ch. 4 of the CCNA Routing and Switching ICND2 200-105 Official Cert Guide, five steps are described for troubleshooting VLANs and VLAN trunks. Create a 1- to 2-page Troubleshooting Guide in the form of a table in Microsoft® Word based on the five steps in Ch. 4. For each step include the following:   

• List the commands you would use to look for problems in VLANs and VLAN trucks. List at least three commands.
• Concisely describe what you would look for in the output of the commands to identify a problem
• Accurately describe what commands you would use to resolve any issues found Create a 14- to 16-slide Microsoft® PowerPoint® presentation, including Introduction, Conclusion, and Reference slides, for the Executive Team that contains the following:
• A high-level description of the key features: STP, Ether Channel, EIGRP, and multi-area OSPF  
• Three or more issue with STP and Ether Channels that could impact the business that are addressed by the Troubleshooting Guide
• An executive-level summary of at least two issues involved with moving from IPv4 to IPv6 as it relates to scalability of a medium-sized network
• What commands are used to apply initial router configurations in IPv6? Provide an example from one of the labs.
• What commands are used to apply the VLANs and Trunk configurations? Provide an example from one of the labs.
• Include detailed speaker notes with each slide Note: Other applications like Adobe® Spark® or Microsoft® Sway® or Mix® can be used instead of PowerPoint®. Be sure to include supportive graphics and appropriate backgrounds and styles. All references need to adhere to APA guidelines