ACCT 346 ENTIRE COURSE

Assignm

ACCT 346 ENTIRE COURSE | Phoenix University

University of Phoenix / ACCT 346
10 Sep 2018
Price: $85
Other / Other

ACCT 346 ENTIRE COURSE | Phoenix University

ACCT 346 Week 1 Homework Assignment

Identify whether each of the items below is a Product Cost or Period Cost:
2. Identify whether each of the items below is a Direct Cost or Indirect Cost: 3. Identify whether each of the below is a Fixed Cost or Variable Cost: 4. Classify each as direct material, direct labor, indirect labor, indirect labor, other manufacturing overhead or period cost, and then answer the 5 questions below:

Factory insurance

Company president's salary

Eggs, salt, water used for baking

Depreciation expense on bake ovens

Paper wrappers for bread

Factory lease

Advertising costs

Factory supervisor salaries

Sales commissions

Flour used in baking bread

Identify whether each of the items below is a Direct Cost or Indirect Cost: (1/2 point each, total 5 points)

Factory insurance

Baker's wages

Eggs used for baking

Depreciation expense on bake ovens

Paper wrappers for bread

Cleaning materials for bake ovens

Utilities used in factory

Factory supervisor salaries

Lubricant for factory equipment

Flour used in baking bread

Identify whether each of the items below is a Fixed Cost or Variable Cost: (1/2 point each, total 5 points)

Shipping costs for bread

Cost of fuel for delivery truck fleet

Factory rent

Factory insurance

Maintenance on delivery trucks

Sales commissions

Wages paid to part-time (hourly) baker's assistant

Oven depreciation

Cost of fruit for cake topping

Factory utilities

Question 4 General Instructions: For this baking operation, you'll need to first classify each expense below as direct material, direct labor, indirect material, indirect labor, other manufacturing overhead or period cost, and then answer the calculation questions in Parts 4b - 4e.

Depreciation expense on factory forklifts ......
Property tax on corporate marketing office ....
Company president's salary .....,,......
Factory janitor wages ...............
Accounting department salaries .....
Bakers’ health insurance ..............
Assorted baking ingredients............
Depreciation expense on administrative office equipment......
Bakers’ wages ...........
Factory utilities ..........
Production supervisors’ salaries .....
Flour ..........................
Factory equipment lubricants ..........

ACCT 346 Week 2 Homework Assignment

Biltz Company uses a predetermined manufacturing overhead rate based on direct labor hours to allocate (apply or charge) manufacturing overhead costs to jobs. During the year, the company actually incurred manufacturing overhead costs of $582,000 and 135,000 direct labor hours were worked. The company originally estimated that it would incur $525,000 of manufacturing overhead during the year and that 150,000 direct labor hours would be worked.

The following account balances at the beginning of January were selected from the general ledger of Ocean City Manufacturing Company:

Work-in-Process (WIP) inventory $0

Raw materials inventory $28,000

Finished goods inventory $40,000

Additional data:

1) Actual manufacturing overhead for January amounted to $62,000.

2) Total direct labor cost for January was $63,000.

3) The predetermined manufacturing overhead rate is based on direct labor cost. The budget for the year called for $250,000 of direct labor cost and $350,000 of manufacturing overhead costs.

4) The only job unfinished on January 31 was Job No. 151, for which total direct labor charges were $5,200 (800 direct labor hours) and total direct material charges were $14,000.

5) Cost of direct materials placed in production during January totaled $123,000. There were no indirect material requisitions during January.

Vintage Fun reproduces old-fashioned style roller skates and skateboards. The annual production and sales of roller skates is 950 units, while 1,750 skateboards are produced and sold. The company has traditionally used direct labor hours to allocate its overhead to products. Roller skates require 2.5 direct labor hours per unit, while skateboards require 1.25 direct labor hours per unit. The total estimated overhead for the period is $114,300. The company is looking at the possibility of changing to an activity-based costing system for its products. If the company used an activity-based costing system, it would have the following three activity cost pools:

ACCT 346 Week 3 Homework Assignment

Beginning WIP inventory is 15,500 units, 75% complete for materials. During the month, 90,000 units were started; 87,000 were finished; and ending WIP was 18,500 units that were 50% complete for materials.

How many equivalent units should be used to allocate costs for materials? (Assume that the weighted average method is used, not FIFO.)

During a period, 38,200 units were completed and 4,200 units were in ending WIP inventory. Ending WIP was 75% complete for direct materials and 50% complete for conversion costs.

2a. What are the equivalent units for direct materials?

Completed Units $38,200 $38,200

Ending Units $4200 (75% complete) $3,150

All Units $42,400 $41,350 Direct Materials Equivalent Units

2b. What are the equivalent units for conversion costs?

ACCT 346 Week 3 Quiz

ACCT 346 Week 4 Homework Assignment

1.MountainAir Company has the following selected data for the past year:

Units sold during year 30,000

Units produced during year 45,000

Units in ending inventory 15,000

Variable manufacturing cost per unit $ 4.50

Fixed manufacturing overhead (in total) $ 20,250

Selling price per unit $ 12.00

Variable selling and administrative expense per unit $ 1.00

Fixed selling and administrative expenses (in total) $ 4,000

There were no units in beginning inventory.

Required:

Prepare an income statement for last year using absorption (full) costing.

Calculate the total value of the ending inventory using absorption (full) costing.

Prepare an income statement for last year using variable costing (i.e., contribution margin income statement).

Calculate the total value of the ending inventory using variable costing.

ACCT 346 Week 4 Midterm 1

Question :

(TCO 1) Managerial accounting stresses accounting concepts and procedures that are relevant to preparing reports for

Question :

TCO 1) Which of the following statements regarding fixed costs is true?

Question :

(TCO 1) You own a car and are trying to decide whether or not to trade it in and buy a new car. Which of the following costs is an opportunity cost in this situation?

Question :

(TCO 1) Shula’s 347 Grill has budgeted the following costs for a month in which 1,600 steak dinners will be produced and sold: materials, $4,080; hourly labor (variable), $5,200; rent (fixed), $1,700; depreciation, $800; and other fixed costs, $600. Each steak dinner sells for $14.00 each. How much is the budgeted variable cost per unit?

Question :

(TCO 1) Which of the following is an example of a manufacturing overhead cost?

Question :

(TCO 1) Which of the following is a period cost?

Question :

(TCO 1) If the balance in the Finished Goods Inventory account increased by $30,000 during the period and the cost of goods manufactured was $220,000, how much is cost of goods sold?

Question :

(TCO 2) BCS Company applies manufacturing overhead based on direct labor cost. Information concerning manufacturing overhead and labor for August follows:

Estimated

Actual

9.Question :

(TCO 2) During 2011, Madison Company applied overhead using a job-order costing system at a rate of $12 per direct labor hours. Estimated direct labor hours for the year were 150,000, and estimated overhead for the year was $1,800,000. Actual direct labor hours for 2011 were 140,000 and actual overhead was $1,670,000.

What is the amount of under or over applied overhead for the year?

Question :

(TCO 3) Companies in which of the following industries would not be likely to use process costing?

Question :

(TCO 3) The Blending Department began the period with 45,000 units. During the period the department received another 30,000 units from the prior department and completed 60,000 units during the period. The remaining units were 75% complete. How much are equivalent units in The Blending Department’s work in process inventory at the end of the period?

Question :

(TCO 3) During March, the varnishing department incurred costs of $90,250 for direct labor. The beginning inventory was 3,500 units and 10,000 units were transferred to the varnishing department from the sanding department during June. The direct labor cost in the beginning inventory was $27,270. The ending inventory consisted of 2,000 units, which were 25% complete with respect to direct labor. What is the cost per equivalent unit for direct labor?

Question :

(TCO 4) Clearance Depot has total monthly costs of $8,000 when 2,500 units are produced and $12,400 when 5,000 units are produced. What is the estimated total monthly fixed cost?

Question :

(TCO 4) The margin of safety is the difference between

Question :

(TCO 4) Allen Company sells homework machines for $100 each. Variable costs per unit are $75 and total fixed costs are $62,000. Allen is considering the purchase of new equipment that would increase fixed costs to $84,000, but decrease the variable costs per unit to $60. At that level Allen Company expects to sell 3,000 units next year. What is Allen’s break-even point in units if it purchases the new equipment?

3.Question :

(TCO 4) Paula Corporation sells a single product at a price of $275 per unit. Variable cost per unit is $135 and fixed costs total $356,860. If sales are expected to be $825,000, what is Paula’s margin of safety?

Question :

(TCO 5) In variable costing, when does fixed manufacturing overhead become an expense?

Question :

(TCO 5) Variable costing income is a function of:

Question :

(TCO 5) Peak Manufacturing produces snow blowers. The selling price per snow blower is $100. Costs involved in production are:

Direct Material per unit

$20

Direct Labor per unit

Variable manufacturing overhead per unit

Fixed manufacturing overhead per year

$148,500

In addition, the company has fixed selling and administrative costs of $150,000 per year. During the year, Peak produces 45,000 snow blowers and sells 30,000 snow blowers. How much is cost of goods sold using full costing?

7.Question :

(TCO 6) Costs may be allocated to

Question :

(TCO 5) An allocation base

Question :

(TCO 6) The building maintenance department for Jones Manufacturing Company budgets annual costs of $4,200,000 based on the expected operating level for the coming year. The costs are allocated to two production departments. The following data relate to the potential allocation bases:

Production Dept. 1

Production Dept. 2

Square footage

15,000

45,000

Direct labor hours

25,000

50,000

If Jones assigns costs to departments based on square footage, how much total costs will be allocated to Production Department 1

Question :

(TCO 7) A company is trying to decide whether to sell partially completed goods in their current state or incur additional costs to finish the goods and sell them as complete units. Which of the following is not relevant to the decision?

Question :

(TCO 7) BigByte Company has 12 obsolete computers that are carried in inventory at a cost of $13,200. If these computers are upgraded at a cost of $7,500, they could be sold for $15,300. Alternatively, the computers could be sold "as is" for $9,000. What is the net advantage or disadvantage of reworking the computers?

Question :

(TCO 7) Olde Store has 12,000 cans of crab meat just a week past the expiration date. Each can cost $0.31. The cans could be sold as is for $0.20 each, or relabeled and sold as gourmet cat food. The cost of relabeling the cans would be $0.04 per can and the cans would then sell for $0.29 per can. What should be done with the cans and why?

Question :

(TCO 3) Describe a process costing system, including the types of companies that commonly use this system. How can process costing information be used in incremental analysis?

Question :

(TCO 7) Each year, ACE Engines surveys 7,600 former and prospective customers regarding satisfaction and brand awareness. For the current year, the company is considering outsourcing the survey to RBG Associates, who have offered to conduct the survey and summarize results for $50,000. Robert Ace, the president of ACE Engines, believes that RBG will do a higher-quality job than his company has been doing, but is unwilling to spend more than $12,000 above current costs. The head of bookkeeping for ACE has prepared the following summary of costs related to the survey in the prior year.

Prepare an incremental analysis in good form to determine the impact on profit of going outside versus conducting the survey as in the past. Will ACE accept the RBG offer? Why or why not?

Question :

(TCO 4) The following monthly data are available for RedEx, which produces only one product that it sells for $84 each. Its unit variable costs are $28 and its total fixed expenses are $64,960. Sales during April totaled 1,600 units.

ACCT 346 Week 4 Midterm 2

1.Question :

(TCO 1) Which of the following is not a difference between financial accounting and managerial accounting?

Question :

TCO 1) Which of the following statements regarding fixed costs is true?

Question :

(TCO 1) You own a car and are trying to decide whether or not to trade it in and buy a new car. Which of the following costs is an opportunity cost in this situation?

Question :

Question :

(TCO 1) Which of the following is an example of a manufacturing overhead cost?

Question :

(TCO 1) Product costs

Question :

(TCO 1) At December 31, 2010, WDT Inc. has a balance in the Work in Process Inventory account of $62,000. At January 1, 2010, the balance was $55,000. Current manufacturing costs for the year are $292,000, and cost of goods sold is $284,000. How much is cost of goods manufactured?

Question :

(TCO 2) BCS Company applies manufacturing overhead based on direct labor hours. Information concerning manufacturing overhead and labor for August follows:

Estimated

Actual

Question :

(TCO 2) Citrus Company incurred manufacturing overhead costs of $300,000. Total overhead applied to jobs was $306,000. What was the amount of overapplied or underapplied overhead?

Question :

(TCO 3) Companies in which of the following industries would notbe likely to use process costing?

11.Question :

(TCO 3) The Blending Department began the period with 20,000 units. During the period the department received another 80,000 units from the prior department and at the end of the period 30,000 units remained, which were 40% complete. How much are equivalent units in The Blending Department’s work in process inventory at the end of the period?

Question :

(TCO 3) Ranger Glass Company manufactures glass for French doors. At the start of May, 2,000 units were in-process. During May, 11,000 units were completed and 3,000 units were in process at the end of May. These in-process units were 90% complete with respect to material and 50% complete with respect to conversion costs. Other information is as follows:

Calculate the cost per equivalent unit for conversion costs.

Question :

(TCO 4) Clearance Depot has total monthly costs of $8,000 when 2,500 units are produced and $12,400 when 5,000 units are produced. What is the estimated total monthly fixed cost?

Question :

(TCO 4) Which of the following will have no effect on the break-even point in units?

Question :

(TCO 4) Circle K Furniture has a contribution margin ratio of 16%. If fixed costs are $176,800, how many dollars of revenue must the company generate in order to reach the break-even point?

Question :

(TCO 4) Randy Company produces a single product that is sold for $85 per unit. If variable costs per unit are $26 and fixed costs total $47,500, how many units must Randy sell in order to earn a profit of $100,000?

Question :

(TCO 5) In full costing, when does fixed manufacturing overhead become an expense?

Question :

(TCO 5) Variable costing income is a function of:

Question :

(TCO 5) Peak Manufacturing produces snow blowers. The selling price per snow blower is $100. Costs involved in production are:

Question :

(TCO 6) Which of the following is not a reason that companies allocate costs?

Question :

(TCO 6) Which of the following statements about cost pools is not
true?

Question :

Production Dept. 1

Question :

(TCO 7) A company is currently making a necessary component in house (the company is producing the component for its own use). The company has received an offer to buy the component from an outside supplier. A machine is being rented to make the component. If the company were to buy the component, the machine would no longer be rented. The rent on the machine, in relation to the decision to make or buy the component, is:

Question :

(TCO 7) Ricket Company has 1,500 obsolete calculators that are carried in inventory at a cost of $13,200. If these calculators are upgraded at a cost of $9,500, they could be sold for $22,500. Alternatively, the calculators could be sold "as is" for $9,000. What is the net advantage or disadvantage of reworking the calculators?

Question :

(TCO 7) YXZ Company’s market for the Model 55 has changed significantly, and YXZ has had to drop the price per unit from $275 to $135. There are some units in the work in process inventory that have costs of $160 per unit associated with them. YXZ could sell these units in their current state for $100 each. It will cost YXZ $10 per unit to complete these units so that they can be sold for $135 each.

When the incremental revenues and expenses are analyzed, what is the financial impact?

Question :

(TCO 3) What are transferred-in costs? Which departments will never have transferred-in costs?

Question :

(TCO 7) Computer Boutique sells computer equipment and home office furniture. Currently, the furniture product line takes up approximately 50% of the company's retail floor space. The president of Computer Boutique is trying to decide whether the company should continue offering furniture or just concentrate on computer equipment. If furniture is dropped, salaries and other direct fixed costs can be avoided. In addition, sales of computer equipment can increase by 13%. Allocated fixed costs are assigned based on relative sales.

Computer

Home Office

Equipment

Furniture

Question :

ACCT 346 Week 5 Homework Assignment

Palmer's Gourmet Chocolates produces and sells assorted boxed chocolates. The unit selling price is $50 per box, unit variable costs are $25 per box, and total fixed costs for the company are $2,000.

1a. How many boxes of chocolates must Palmer's Gourmet Chocolates sell to break even?

1b. What are breakeven sales in dollars?

Extreme Sports received a special order for 1,000 units of its extreme motorbike at a selling price of $250 per motorbike. Extreme Sports has enough extra capacity to accept the order. No additional selling costs will be incurred. Unit costs to make and sell this product are as follows: direct materials, $100; direct labor, $50; variable manufacturing overhead, $14; fixed manufacturing overhead, $10.

2a. List the relevant costs for the decision of whether or not to accept the special order.

2b. What will be the change (difference) in operating income if Extreme Sports accepts the special order?

Should Extreme Sports accept the special order? Why or why not?

Totally Technology manufactures two product lines: Cameras and Video Recorders. The company's product line income statement follows:

Management is considering discontinuing the Video Recorder product line. Accountants for the company estimate that discontinuing the Video Recorder line will decrease fixed cost of goods sold by $10,000 and fixed marketing and administrative expenses by $4,000.

repare an analysis supporting your opinion about whether or not the Video Recorder product line should be discontinued.

ACCT 346 Week 6 Homework Assignment

Cave Hardware's forecasted sales for April, May, June, and July are $200,000, $230,000, $190,000, and $240,000, respectively. Sales are 65% cash and 35% credit, with all accounts receivable collected in the month following the sale. Cost of goods sold is 75% of sales and ending inventory is maintained at $60,000 plus 10% of the following month's cost of goods sold. All inventory purchases are paid 22% in the month of purchase and 78% in the following month.

What are the total cash collections budgeted for June?

Madden Corporation manufactures T-shirts (its only product). The company’s standards for manufacturing T-shirts are as follows:

2a. What is the direct labor rate variance for the month? Is it favorable or unfavorable?

2b. What is the direct labor efficiency variance for the month? Is it favorable or unfavorable?

ACCT 346 Week 6 Quiz

ACCT 346 Week 7 Homework Assignment

1.Gomez Corporation is considering two alternative investment proposals with the following data:

How long is the payback period for Proposal X?
What is the accounting rate of return for Proposal Y?

You have been awarded a scholarship that will pay you $500 per semester at the end of each of the next 8 semesters that you earn a GPA of 3.5 or better. You are a very serious student and you anticipate receiving the scholarship every semester. Using a discount rate of 3% per semester, which of the following is the correct calculation for determining the present value of the scholarship?

PLEASE STATE WHY YOU CHOSE THE ANSWER THAT YOU DID.

Maersk Metal Stamping is analyzing a special investment project. The project will require the purchase of two machines for $30,000 and $8,000 (both machines are required). The total residual value at the end of the project is $1,500. The project will generate cash inflows of $11,000 per year over its 8-year life. If Maersk requires a 6% return, what is the net present value (NPV) of this project? (Use present value tables or Excel.)

Hincapie Manufacturing is evaluating an investment in a new metal stamping machine costing $30,924. Hincapie estimates that it will realize $12,000 in annual cash inflows for each year of the machine's 3-year useful life. Approximately, what is the internal rate of return (IRR) for the investment? (Use present value tables or Excel.)

ACCT 346 Week 8 Final Exam

Question :

(TCO 1) The principle managers follow when they only investigate significant departures from the plan is commonly known as

Points Received:

4 of 4

2.Question :

(TCO 1) Which of the following is not likely to be a fixed cost?

Points Received:

4 of 4

3.Question :

(TCO 2) Which of the following is not a manufacturing cost?

Points Received:

4 of 4

4.Question :

(TCO 2) An allocation base is

Points Received:

4 of 4

5.Question :

(TCO 3) Equivalent units are calculated by

Points Received:

4 of 4

6.Question :

(TCO 3) In the assembly department, all the direct materials are added at the beginning of the processing. Beginning Work in Process inventory consists of 2,000 units with a direct materials cost of $31,860. During the period, 15,000 units are started and direct materials costing $250,000 are charged to the department. If there are 1,000 units in ending inventory, what is the cost per equivalent unit?

Points Received:

4 of 4

7.Question :

(TCO 4) Regression analysis

Points Received:

4 of 4

8.Question :

(TCO 4) The number of units that must be sold to exactly cover its fixed and variable costs is the

Points Received:

4 of 4

9.Question :

(TCO 5) Which of the following is treated as a product cost in variable costing?

Points Received:

4 of 4

10.Question :

(TCO 5) If the number of units sold is less than the number of units produced

Points Received:

4 of 4

11.Question :

(TCO 6) A contract which specifies that the suppler will be paid for the cost of production as well as some fixed amount or percentage of cost is called a(n)

Points Received:

4 of 4

12.Question :

(TCO 6) Which of the following is not generally true when a company compares ABC and traditional costing?

Points Received:

4 of 4

13.Question :

(TCO 7) Fixed costs that will be eliminated if a particular course of action is undertaken are called

Points Received:

4 of 4

Page:

1.Question :

(TCO 7) Common costs

Points Received:

4 of 4

2.Question :

(TCO 8) Target costing

Points Received:

4 of 4

Question :

(TCO 8) Which of the following are relevant in deciding whether to accept or reject a special order?

Points Received:

4 of 4

4.Question :

(TCO 9) Present value techniques

Points Received:

4 of 4

5.Question :

(TCO 9) The internal rate of return

Points Received:

4 of 4

6.Question :

(TCO 10) A method of budget preparation that requires all budgeted amounts to be justified by the department, even if the amounts were supported in prior periods, is called

Points Received:

4 of 4

7.Question :

(TCO 10) Which budget is prepared first?

Points Received:

4 of 4

Question :

(TCO 10) The standard cost is

Points Received:

4 of 4

9.Question :

(TCO 10) In general, an unfavorable material variance arises from

Points Received:

4 of 4

10.Question :

(TCO 10) The type of center that has responsibility for generating revenue as well as controlling costs is a(n)

Points Received:

4 of 4

11.Question :

(TCO 10) Responsibility accounting holds managers responsible for

Points Received:

4 of 4

12.

Question :

(TCO 10) Which ratio measures the rate earned on total capital provided by the owners?

Points Received:

4 of 4

Page:

1.Question :

(TCO 1) Distinguish managerial accounting from financial accounting. Include a brief discussion of the differences in the types of information provided to users as well as the differences of the users of the accounting information.

Points Received:

20 of 20

Question :

(TCO 6) Booth Financial Services, LLC has two revenue producing departments, Financial Planning and Business Consulting. The accounting department is trying to determine the best method to allocate $1,000,000 of common costs (secretarial staff, reception personnel, etc), either by salary or number of employees. Information on the revenue departments are as follows:

Department

Employees

Salaries

Financial Planning

150 employees

$10,000,000

Business Consulting

50 employees

$5,000,000

(a) Allocate the $1,000,000 common costs to the two revenue departments using both methods.
(b) Why are allocations called arbitrary?

Points Received:

25 of 25

3.Question :

(TCO 10) Charlie Corp sells it products on both credit and cash basis. Monthly sales are sold 20% for cash, 80% for credit. Credit sales are collected 40% in the month of sale and 60% the following month. Sales for the first quarter are as follows:

January $100,000
February $150,000
March $125,000

Compute cash collections for February.

Points Received:

25 of 25

4.Question :

(TCO 2) Acme Fireworks uses a traditional overhead allocation based on direct labor hours. For the current year overhead is estimated at $1,000,000 and direct labor hours are budgeted at 200,000 hours. Actual hours worked were 195,000 and actual overhead was $978,000.

(a) Compute the predetermined manufacturing overhead rate.
(b) Compute the applied manufacturing overhead.
(c) Compute the amount of over/under applied manufacturing overhead.

Points Received:

25 of 25

Page:

1 2 3 4

1.Question :

(TCO 9) An investment of $185,575 is expected to generate returns of $65,000 per year for each of the next four years. What is the investment's internal rate of return?

Points Received:

25 of 25

2.Question :

(TCO 4) Legal Docs Inc is a legal services firm that files incorporation papers for small businesses. They charge $1,000 per application. This year's income statement shows the following:

Sales $1,295,000
Variable Expenses $1,023,000
Contribution margin $272,000
Fixed costs $250,000
Profit $22,000

Required:
(a) Compute the break-even point in units.
(b) Compute the contribution margin ratio.
(c) Compute the current margin of safety.
(d) How many applications must the company sell to make a profit of $350,000?

Points Received:

25 of 25

3.Question :

(TCO 5) The following data has been taken from Air-Tite company in its first year of business.

Units produced 100,000
Units sold 80,000
Units in ending inventory 20,000
Fixed manufacturing overhead $400,000

(a) Compute the amount of fixed manufacturing overhead that would be expensed in the current year if full absorption costing is used.
(b) Compute the amount of fixed manufacturing overhead that would be expensed in the current year if variable costing is used.
(c) Compute the amount of fixed manufacturing overhead that would be included in ending inventory under full absorption costing.

ACCT 346 Managerial Accounting Course Project on Bravo Baking Company

Details

This course has a six-part project with deliverables due in six of the eight weeks.

The course project takes a new company through hypothetical scenarios to reinforce the TCOs. By using a single entity, in a variety of business situations, you will see the practical application of a number of managerial accounting concepts taught in this course.

You will have access to an interactive Excel Template in Doc Sharing to complete your work in proper format. Each week's Assignment page will tell you which portion of the template you need to complete for that week.

You will have Dropbox deliverables in Weeks 1, 2, 3, 5, 6, and 7. Point values do vary in that Week 1 is worth 10 points, Week 2 is worth 30 points, and the remaining Weeks (3, 5, 6, and 7) are 40 points apiece. See Syllabus "Due Dates for Assignments & Exams" for due date information.

Lost Password