CE/1103 CE1103 CE 1103 ASSESSMENT 7

With the growing concern over litigation involving improper use of products, warning labels are becoming an integral part of the manufacturing process. The labels are intended to warn users about the potential hazards of the product and may warn against improper use. Which of the following fundamental legal principles is involved in not labeling a large blade hunting knife?

According to Occupational Health and Safety Advisory Services (OHSAS) 18001, a successful management system should be based on all of the following EXCEPT:

Which of the following emissions control devices are highly efficient filtration devices that minimally impede the flow of gases through the device and can easily remove fine particulate matter, such as dust and smoke, from the air stream?

An OSHA recordable includes which of the following?

A commercial motor vehicle transporting hazardous materials is required to display placards in which of the following locations?

Which of the following is NOT a required training item under the Occupational Safety and Health Administration (OSHA) Hazard Communication Standard?

Which of the following most correctly defines the purpose of electrical circuit breakers?

__________ is a common and devastating result of some volcanic eruptions, resulting in fast moving currents of hot gases and rock at speeds greater than 50 mph/80 kmh with gas temperatures of 1000°C/1800°F, which hug the ground and travel downhill.

Who provides the required placards when shipping hazardous material?

Which of the following would best relate to the term "privity"?

A tank farm is completely diked and contains four fuel storage tanks. Tank number one is 100 feet in diameter and 50 feet high. Tank two and three are 50 feet in diameter and 20 feet high. Tank number four is 40 feet in diameter and 10 feet high. The area enclosed by the diking is 250 feet by 350 feet. What is the required height for the dike enclosing the tank farm? Assume there is no slope on the dike walls.

Which International Organization of Standardization (ISO) standard covers environmental management?

An employee who works in a manufacturing area where presumed asbestos containing material (PACM) or asbestos containing material (ACM) is being used requests information on PACM. The employee is entitled to:

What is the primary consideration when preparing for a potential disaster?

Safety and health management systems, such as BSI 18001 series and ANZI/AIHA Z10-2005, are built on the principles and processes developed by quality pioneer Edward Deming. Which of the following accurately describes the systems process?

The most effective way to fix accountability for environmental, safety, and health losses is to:

According to the National Safety Council (NSC), which of the following is NOT included in good accident investigation procedures?

Which of the following correctly identifies a DOT oxidizer placard?

When making an environmental audit, it is best to follow a defined set of procedures, sometimes called a protocol. The protocol has three basic areas. Which of the following is NOT considered as a part of an environmental protocol?

What are the three basic legal principles that can be used by plaintiffs in product liability cases?